Staining Cabinets will Never Be Difficult with this Step-by-Step Guide

Staining Cabinets it’s always a good project whenever you want to renew your home appearance. With this step-by-step guide, you will reach that new good-looking for your cabinets.

If your cabinets have an old or worn finish, they can become dull and unattractive. Fortunately, the quickest, most effective, and budget-friendly solution is to update without the need for chemical stripping or heavy sanding. In other words, the staining process is the elemental idea to provide that brand-new look to your cabinets.

Staining Cabinets with this Step-by-Step Guide.

Not enough budget to buy new cabinets? Just give them the best staining, and they will have a brand-new style.  Staining cabinets will never be more accessible with this step-by-step guide.

1. Choose A Stain
2. Remove Hardware and protect your floor
3. Remove previous finish
4. Apply the sanding sealer
5. Apply Stain
6. Finish it / Give your style

Remember

Before starting any construction, painting, or staining project, remember to use the appropriate safety equipment.

Parts of the protection equipment you need to have:

• Gloves
• Eyeglass Protection
• Mask
• Old clothes (avoid staining or damaging clothing)

Choose A Stain | staining cabinets

Before starting with the whole process of staining cabinets, you already have to have a design in mind; that way, you can choose the tone or shade of stain faster. There are different types of stains to select from. There are oil-based and water-based stains, gel stains, and stain/sealer in-one formulas.

Also, remember the type of wood your cabinets are made of; since not all stain goes well with all types of wood. In order to have good contrast, the stain color must complement the wood’s natural color.

Remove Hardware and Protect your Floor

When removing the cabinets, it is essential to remove the hinges, handles, knobs, latches, and other hardware from the drawers with the help of a screwdriver. This is a practical idea, as it will facilitate stain application.

If you prefer to save time, you can perfectly well just remove the cabinets, but keep in mind that the stain will be more difficult to penetrate the wood.

Make sure to protect your floor, too. Be sure to protect floors, countertops, and any other work area surfaces with cleaning cloths or plenty of newspaper.

Remove Previous Finish

Remove the previous finish by sanding. Using a medium/low-grit sandpaper will help you in this step to remove it, and at the same time, it will smooth out any imperfection the wood has.

Always sand in the direction of the wood grain. Any swirl or forced marks caused by sanding will stand out when stained, driving a very bad looking on your cabinets.

Also, another alternative exists to remove the previous stain. Using chemical strippers is another way, and it’s much more manageable. However, you got to be very careful to use it. Since the surface will be very soft, any heavy scrub will damage the wood.

Extra Tip

Try to ventilate as much as you can the room. Preferably, do this work, outside your house. Or, try to open all doors and windows. This is important, so you don’t breathe any chemicals.

Remember to follow all manufacturer instructions and wear all the safety equipment. As a result, you will have a clean and safe area to work.

Apply the sanding sealer | staining cabinets

The sealer helps the wood absorb the stain evenly. One trick is to apply it after the stain to reduce the number of finish coats needed.

Sanding Sealer and pre-stain wood conditioner help and work as a wood primer. It is highly recommended to shake the sealer container before and apply two thin coats using a small paintbrush.

Apply Stain

It’s time to stain the cabinets. Using a medium-sized paintbrush will allow it to penetrate the wood, providing a better look and protection.

Remember the design you pictured for your cabinet; with that, you will know if the cabinets require more coats. Don forget that more coats are for darker colors and fewer colors to provide a brighter color.

Extra Tip

If you are just setting your mind on painting inside and outside the cabinets, it’s great. However, some people do not worry about the interior since it’s the least visible area. But, for better and aesthetic results, you may paint inside and outside.

Finish it / Give your style

When you are done staining, and the surfaces are completely dry, make sure you are delighted with the color of the wood. In this part, you can set your imagination free. You can add new knobs or different colors with the screws. Adding a unique classic or futurist style.

Once your cabinets are completely dry, you can proceed to reinstall cabinet doors and drawers and their hardware to make sure everything fits and the designs are correct.

Improve your House Design and Value

Now that you have learned the process of staining cabinets, you are capable to implement it in all types of cabinets. Staining kitchen cabinets are always the“ complicated part” or at least that’s what people often say.

However, now with this marvelous blog and its step-by-step guide, you can be sure that there are non-difficult areas to work on it. Remember, they are no difficult tasks, but not well-practiced tasks.

By just doing a little staining cabinets process, you will see immediately the change of your place. You will feel that sense of brand-new, adding value to your home and expanding your design ideas, are just pieces of benefits you can achieve by staining your cabinets!

Get Professional Assistance!

Now that you learned how easy staining cabinets are, you may proceed and try.

And if you are looking for a better look and quality for your cabinets, you can contact us!

Call us now and get your free quote! Contact us today to see reflected all your designs ideas on every inch of your home.

Do not hesitate to communicate with us, so you don’t have to deal with this task. Quality and fantastic assistance are what we provide the most.